ASD60-III syringe pump is a programmable precision liquid handling device. Linear speed range: 0.01mm/s-60mm/s. Controlled by computer or microcontroller, replace the traditional operation of diluting and dispensing. Widely used in blood, chemistry, food and environment analysis.
| Accuracy | Error ≤±0.1%(stroke≥30% maximum stroke) |
| Max. stroke(Steps) | 60mm(6000 steps or 48000 steps) |
| Linear speed range | 0.01mm/s-60mm/s |
| Run time per stroke | 1.25s-100min |
| Speed resolution | 0.01mm/s |
| Stroke resolution | 0.01mm or 0.00125mm |
| Valve switch time | ≤250 ms between adjacent ports |
| Valves type | 3 port valve, 4 port valve, 3 port distribution valve, 9 port distribution valve |
| Valve material | Valve body: PCTFE; Valve element: PTFE |
| Tubing fittings | 1/4-28UNF |
| Syringe fittings | 1/4-28UNF |
| Power supply | DC24V±10%/1.25A(Peak value) |
| Communication interface | RS232/RS485/CAN |
| Syringes | 50μL, 100μL, 250μL, 500μL, 1.0mL, 2.5mL, 5.0mL, 10mL, 25mL |
| Syringe material | Barrel material: Borosilicate glass; Plunger rod material: Stainless steel; Plunger seal material: PTFE |
| Baud rate | 9600 or 38400(RS232/RS485); 100K, 125K, 250K, 500K, 1M(CAN) |
| Addressing | UP to 15 individual addresses available(BCD switch) |
| Input | Two TTL level signal inputs, for restart the paused instruct |
| Output | Three TTL level signal outputs, for synchronous external devices |
| Max.pressure | 0.68MPa(High pressure above 0.68MPa, please contact us) |
| Condition temperature | 15℃~40℃(Low temperature operation requires a low temperature syringe) |
| Storage temperature | -20℃~65℃ |
| Relative humidity | 80%(RH) |
| Dimension(mm) | 303×161.9×297.5(L×W×H) |
| Weight | 7.0kg |

We use cookies
Our website uses cookies to enhance user experience, personalise content and show you more relevant adverts about our great products, also to analyze our website traffic.